Sensing labs Senlab devices “Thingpark Approved” by Actility

Sensing labs Senlab devices “Thingpark Approved” by Actility

Uncategorized

Sensing Lab is very proud to announce its Senlab LoRaWAN™ sensors successfully passed Actility’s “ThingPark Approved” programme. The two companies have been working hand in hand since early 2014, and this announcement proves how much ground was covered throughout the years by Actility with its IoT platform, and by Sensing Labs with the industrialisation of its sensors and confirmation of Senlab devices performance.
The full content of Actility’s announcement can be found here.

Sensing Labs announces full intergration of its Senlab products with Actility.

Sensing Labs announces full intergration of its Senlab products with Actility.

Blog Blog

Sensing Labs will be providing new low power sensors based on the LoRa technology and integrated with the ThingPark Wireless Internet Of Things network from Actility.

 

Sensing Labs will be providing new low power based sensors based on the LoRa

technology and integrated with the ThingPark Wireless Internet Of Things network

 

actility

Paris, 24th of September 2014.

Sensing Labs, the Internet of Things low-power sensor expert has announced the release of

their new LoRa enabled sensors for the Smart Metering, Intelligent Building and Smart City

market. This new solution will allow building managers to achieve greater energy efficiency in

monitoring energy and water consumption. The new range of products from Sensing Labs is

fully integrated with the ThingPark Wireless network of base stations. Once rolled out on a

building roof-top, a ThingPark Wireless antenna can collect energy efficiency data from Sensing

Labs sensors over a distance of 2km for dense cities and up to 15 km in less dense regions.

“The end-to- end solution will help the smart building and smart metering eco-system with a

more cost-effective solution that provides higher indoor penetration and longer range compared

to existing solutions,” said Yann Guiomar, CEO of Sensing Labs

 

An end-to- end solution based on the ThingPark Wireless long range network

 

The new unique solution announced by Sensing Labs and Actility uses the license free

Industrial, Scientific and Medical (ISM)-band spectrum, allowing low cost and fast roll-out of

M2M networks to accommodate industrial sensors for a wide range of IoT applications. The

solution incorporates the LoRa spread-spectrum technology transceivers making it possible to

reliably transmit low data rate signals up to 15 km without issues related to crystal accuracy

found in traditional systems for smart metering and industrial applications based on frequency

shift keying (FSK) modulation. Data captured from Sensing Labs sensors are sent through the

ThingPark Wireless to third-party smart energy management solutions or can be stored in

Actility’s ThingPark Cloud infrastructure to be used for post analysis in energy savings

programs. “We are happy to welcome Sensing Labs into the growing base of sensor partners

integrated with ThingPark Wireless. Sensing Labs’s team brings a unique experience in the field

of Smart Building and Smart metering applications and our end-to- end solution,” said Olivier

Hersent, CEO of Actility.

 

Bringing Sensing Labs smart metering experience to the Internet of Things market

 

Retrieving energy consumption profiles is becoming a major challenge with buildings now

consuming approximately 40% of the world’s energy. Because all building structures differ

depending on location and age, getting accurate readings on all energy consumptions is key. To

build energy saving and optimization programs, companies need solutions that are easy to roll

out and take into account seasons and occupancy levels. Sensing Labs products and

engineering team bring a unique experience in designing smart utility metering products with

low-power capability. They combine high reliability, cutting-edge customer-oriented firmware as

well as a plug and play installation philosophy.

 

About Actility

 

Actility is an industry leader in Machine to Machine (M2M) large scale infrastructure with

ThingPark®, the new generation standard-based M2M communication platform. Actility’s

ThingPark Wireless® network provides long-range coverage for low-power sensors used in

SmartCity, SmartBuilding and Smart Factory applications. Actility also provides the ThingPark

Cloud which provides big data storage for sensor data and exposes sensor function through an

open API allowing developers to provide vertical applications on top of rolled out sensors. To

help vendors transform their sensors Actility provides the ThingPark IoT platform which include

embedded software solutions and cloud solutions to help devices connect to innovative

applications. Visit www.actility.com.

 

About Sensing Labs

 

France based Sensing Labs company offers long range wireless sensors solutions for Smart

Metering, Intelligent building and Smart City markets by way of a standard range of products as

well as specific wireless sensors development based on customers demands. High reliability,

easy installation and embedded firmware bringing high value services for customers are the key

drivers of Sensing Labs development teams.

Visit www.sensing-labs.com

 

Paris, 24th of September 2014